DailyPackaging < AFA Sprayer
Spray volume: 1.2-1.35 cc
Usage: daily, clean, clean
Packing: packed in plastic bags and carton packaging
OpAd sprayer series
Preloading type bayonet type sprayer
features
OnePak ™ preloading engine, remain the state of preloading, drip tight, imitation of leakage
All polyolefin plastic sprayer - do not use metal, 100% recyclable
Rapid, automatic and manual block
Can choose different gushing quantity according to the customers' demand
Has won the European and American children safe use certificate
Cap: embedded cap and can be used multiple times
Output: 1.0 cc (PP)/cc 1.15 or 1.15 cc (PET)
V-shaped incision straws straw: bending
Trigger: standard finger trigger
Colour: opaque color
Transparent color
Customer specified color
OnePak ™ pre compression technology
When the piston into the atomizer, pre pressure at the same time
The compressed liquid will leave spray from the line of least resistance
Seal valve shut down to prevent fluid backflow
When the liquid pressure reaches 3 times atmospheric pressure, dome pressure to open
Dome valve opened suddenly will lead to high speed liquid jet, and because of the pressure constant, can be a very good spray and foam effect
note
Unlike conventional sprayer, adopting compression technology of OpUs and OpAd output in the process of a trigger is constant.And this technology has solved the traditional spray in the process of using the trigger and releases the trigger dripping phenomenon.
The advantages of pre compression
Get effective and satisfactory effect of spray
There won't be in use "drip" to happen
Excellent foam & spray shape
Fog bead particle size stability
No leakage when nozzle opening
After the first use of conceptualising preloading
Efficient control valve, low strike force
Usage: daily, clean, clean
Packing: packed in plastic bags and carton packaging
OpAd sprayer series
Preloading type bayonet type sprayer
features
OnePak ™ preloading engine, remain the state of preloading, drip tight, imitation of leakage
All polyolefin plastic sprayer - do not use metal, 100% recyclable
Rapid, automatic and manual block
Can choose different gushing quantity according to the customers' demand
Has won the European and American children safe use certificate
Cap: embedded cap and can be used multiple times
Output: 1.0 cc (PP)/cc 1.15 or 1.15 cc (PET)
V-shaped incision straws straw: bending
Trigger: standard finger trigger
Colour: opaque color
Transparent color
Customer specified color
OnePak ™ pre compression technology
When the piston into the atomizer, pre pressure at the same time
The compressed liquid will leave spray from the line of least resistance
Seal valve shut down to prevent fluid backflow
When the liquid pressure reaches 3 times atmospheric pressure, dome pressure to open
Dome valve opened suddenly will lead to high speed liquid jet, and because of the pressure constant, can be a very good spray and foam effect
note
Unlike conventional sprayer, adopting compression technology of OpUs and OpAd output in the process of a trigger is constant.And this technology has solved the traditional spray in the process of using the trigger and releases the trigger dripping phenomenon.
The advantages of pre compression
Get effective and satisfactory effect of spray
There won't be in use "drip" to happen
Excellent foam & spray shape
Fog bead particle size stability
No leakage when nozzle opening
After the first use of conceptualising preloading
Efficient control valve, low strike force
预压式卡口型喷雾器
特性
OnePak™预压引擎，始终处于预压状态，防滴漏，仿渗漏
全聚烯烃塑料喷雾器--不使用金属，100%可回收
快速，全自动和手动封盖
可按客户需求选择不同的喷出量
已获得欧洲及美国儿童安全使用认证
瓶盖：嵌入式瓶盖，可多次使用
输出：1.0cc（PP）/1.15cc或 1.6cc（PET）
吸管：弯曲的V形切口吸管
扳机：标准二指扳机
颜色：不透明色
透明色
客户指定色
OnePak™预压缩技术
当活塞推入喷雾器时，同时产生预压力
受压缩的液体将从阻力最小的管路离开喷雾器
密封阀关闭，阻止液体回流
当液体压力达到3倍大气压，圆顶发受压打开
圆顶阀的突然打开将导致液体高速喷出，并因压力恒定，可以形成非常良好的喷雾及泡沫效果
备注
与传统的喷雾器不同，采用预压缩技术的OpUs和OpAd的输出量在一次触发过程中是恒定的。并且此技术解决了传统喷雾器在使用过程中在触发扳机及释放扳机时的滴漏现象。
预压缩的优点
得到高效且令人满意的喷雾效果
使用中不会有“滴漏”情况发生
卓越的泡沫&喷雾形状
雾珠颗粒大小稳定
喷嘴打开时无渗漏
第一次使用后即可形成预压
高效的控制阀，低扳击力
